✨ New Arrivals Just Dropped!Explore
HomeStore

SodaStream Terra Art Duo Quick Disconnect Adaptor for Screw In FreedomOne Hose-G1/2

Product image 1
1 / 3

SodaStream Terra Art Duo Quick Disconnect Adaptor for Screw In FreedomOne Hose-G1/2

Only for FreedomOne Hose adaption NOT Suitable to Adapt bottles (with this fitting, bottles will protrude out the bottom of the machine)

Stop spending money on expensive refills! Use this adaptor with one of our FreedomOne hose adaptors and hook up a 2.6kg or 6kg Tank and not worry about frequent refill costs.

A typical Soda Stream cylinder can only carbonate up to 60L and will cost about $20 per fill.  So given these figures the larger cylinder and this hose will pay itself off once you fill the 2.6kg gas cylinder once.  It's a no brainer! 

We have included two options when drilling through your bench top to fit your hose. Either remove the stainless thread from the brass connection and drill a 14-15mm hole. You will need to use Lock-Tite glue or plumbers tape to get a good seal on this connection after you re-fit it.
Without removing the brass connection piece you would need to drill a 30mm hole to fit the bottle connection end through your bench top.



Additional Recommended Purchases:
KL01489 2.6kg CO2 Cylinder (Full) $20 Refill at KegLand
or
KL01496 6.0kg CO2 Cylinder (Full) $40 Refill at KegLand

KL04190 36 Inch FreedomOne Hose Adaptor
or
KL04206 72 Inch FreedomOne Hose Adaptor

$3.28

Original: $10.95

-70%
SodaStream Terra Art Duo Quick Disconnect Adaptor for Screw In FreedomOne Hose-G1/2

$10.95

$3.28

Product Information

Shipping & Returns

Description

Only for FreedomOne Hose adaption NOT Suitable to Adapt bottles (with this fitting, bottles will protrude out the bottom of the machine)

Stop spending money on expensive refills! Use this adaptor with one of our FreedomOne hose adaptors and hook up a 2.6kg or 6kg Tank and not worry about frequent refill costs.

A typical Soda Stream cylinder can only carbonate up to 60L and will cost about $20 per fill.  So given these figures the larger cylinder and this hose will pay itself off once you fill the 2.6kg gas cylinder once.  It's a no brainer! 

We have included two options when drilling through your bench top to fit your hose. Either remove the stainless thread from the brass connection and drill a 14-15mm hole. You will need to use Lock-Tite glue or plumbers tape to get a good seal on this connection after you re-fit it.
Without removing the brass connection piece you would need to drill a 30mm hole to fit the bottle connection end through your bench top.



Additional Recommended Purchases:
KL01489 2.6kg CO2 Cylinder (Full) $20 Refill at KegLand
or
KL01496 6.0kg CO2 Cylinder (Full) $40 Refill at KegLand

KL04190 36 Inch FreedomOne Hose Adaptor
or
KL04206 72 Inch FreedomOne Hose Adaptor